PENMAN-MONTEITH METHOD
-
The enhanced physical basis and considerable flexibility of the combination
models (such as Penman's) have resulted in their extensive use in the calculation of both free surface
water evaporation and potential evapotranspiration.
-
An advanced combination model which is gaining wide acceptance is the Penman-Monteith equation.
-
Unlike the original Penman model, in the Penman-Monteith equation the mass-transfer
evaporation rate (Ea) is calculated based on physical principles.
-
The original form of the Penman-Monteith equation, in dimensionally consistent units,
is:
ρλE = [ΔH + ρa cp
(es - ea) (ra-1)] / (Δ + γ*) |
(2-50)
|
in which:
- ρλE = total evaporative energy flux (cal cm-2 s-1);
- Δ = saturation vapor pressure gradient with temperature [mb (oC)-1];
- H = energy flux supplied externally, by net radiation (cal cm-2 s-1);
- ρa = density of moist air (gr cm-3);
- cp = specific heat of moist air [cal gr-1 (oC -1)];
- (es - ea) = vapor pressure deficit (mb);
- ra = external (aerodynamic) resistance (s cm-1); and
- γ* = modified psychrometric constant [mb (oC-1)], equal to
γ* = γ [1 + (rs /ra)] |
(2-51)
|
in which
- rs = internal (stomatal or surface) resistance (s cm-1).
- The quantity ra-1 is the external conductance, in cm3 of air per cm2 of
surface per second (cm s-1)
- In evaporation rate units, Eq. 2-50 can be expressed as follows:
E = [ΔEn + ρa cp ρ-1λ-1
(es - ea) (ra-1)] / (Δ + γ*) |
(2-52)
|
in which
- E = evaporation rate (cm s-1);
- En = evaporation rate due to net radiation (cm s-1);
- ρ = density of water (gr cm-3);
- λ = heat of vaporization of water (cal gr-1);
and
- Δ, ρa, cp, (es - ea), and ra
are in the same units as Eq. 2-50.
-
For instance, at 20oC and standard atmospheric pressure:
ρa = 0.00118 gr cm-3;
cp = 0.242 cal gr-1 (oC -1);
ρ = 0.998 gr cm-3; and
λ = 586 cal gr-1.
-
Eq. 2-52 reduces to:
E = [ΔEn + 86400 (0.49 x 10-7) (es - ea) (ra-1)] / (Δ + γ*) |
(2-53)
|
in which
- E = evaporation rate (cm d-1);
- En = evaporation rate due to net radiation (cm d-1);
and
- Δ, γ*, (es - ea), and ra are in the same units as Eq. 2-50.
- Equation 2-53 can be conveniently expressed in Penman form (Eq. 2-36) as
follows:
E = [ΔEn + γ*Ea] / (Δ + γ*) |
(2-54)
|
in which
Ea = 86400 K (es - ea) (ra + rs)-1 |
(2-55)
|
with
Ea = mass-transfer evaporation rate (cm d-1);
and (es - ea), ra and rs
are in the same units as Eq. 2-50 and 2-51, and
K = ρa cp ρ-1 λ-1 γ-1
|
(2-56)
|
is a constant expressed per unit of vapor pressure deficit (mb-1), varying with
temperature and atmospheric pressure.
- At 20oC and standard atmospheric pressure,
γ = 0.667 mb (oC-1), and:
K = [(0.49 X 10-6) γ-1] mb-1 = 0.735 X 10-6 mb-1.
- Taking K' = 86400 K, Eq. 2-55 reduces to:
Ea = K' (es - ea) (ra + rs)-1
|
(2-57)
|
- Thus, at 20oC and standard atmospheric pressure, K' = 0.0635 mb-1 s d-1.
- The external (or aerodynamic) resistance ra varies with the surface roughness
(water, soil, or vegetation) and is inversely proportional to wind speed.
- In other words, the external conductance (and thus, the evaporation rate) increases
with wind speed, as postulated by Dalton (Eq. 2-27).
- The external resistance for evaporation from open water can be estimated as follows:
ra = 4.72 [ln (zm/zo)]2 / (1 + 0.536 v2)
|
(2-58)
|
in which
- ra is given in s m-1;
- zm = height at which meteorological variables are measured (m),
- zo = aerodynamic roughness of the surface (m), and
- v2 = wind speed (m s-1), measured at the 2-m height.
- The external resistance ra (s m-1)
for the reference crop (clipped grass 0.12-m high),
for measurements of wind speed (m s-1),
temperature and humidity at a standardized height of 2 m is:
- The internal (stomatal or surface) resistance is inversely proportional to the
leaf-area index L, i.e., the projected area of vegetation per unit ground area:
in which rs is given in s m-1, and
L = leaf-area index, which is empirically related to crop height.
-
For clipped grass, L = 24 hc (m s-1),
with height in the range 0.05 < hc <
0.15 m.
- For alfalfa, L = 5.5 + 1.5 ln hc,
with 0.1 < hc < 0.5 m.
- From Eq. 2-60, the stomatal resistance of the reference crop (clipped grass
0.12-m high) is:
-
rsrc = 69 s m-1.
- Likewise, for an alfalfa crop with hc = 0.3 m: rs = 54 s m-1.
Example 2-8. Calculate the evaporation rate of the reference crop by the Penman-Monteith method for
the same atmospheric conditions as Example 2.5 in the textbook. Assume standard atmospheric pressure.
|